3.2.016-238-g08c809ab
OTA build Wed Jun 23 09:51:36 CEST 2021
See ovms3.log for details

4c22998e serverV2: periodic send if generating
710e9ffb Suppress false theft alerts due to a suspected SIMCOM GPS bug #2 Check for zero longitude too (also seen: A,B -> A,B -> A,0 -> A,B -> A,B)
dfda1607 serverV2: change to adhoc update and add documentation
b1f856dd CAN AsynchronousInterruptHandler change to support receiving multiple frames per interrupt
2329b879 Change test cantx to use sequence as message ID
988eca92 Vehicle/poller: add standard negative result code names
fcf23108 Move "bus off" errata code to the top of the interrupt handling loop
efd767b7 Address lastest feedback from Michael: Enter listen instead of reset mode Or in instead of clobbering potential new interrupt bits Add a more detailed description of the TWAI_ERRATA_FIX_BUS_OFF_REC errata workaround description
038a4a2f Make changes based on feedback from Michael: Handle bus-off interrupt after TX and RX interrupts. Explicitly enter/exit reset mode.
9280bd38 First attempt at porting the first of four espressif TWAI/CAN errata fixes
1400b2f7 Poller: fix UDS 0x31 Routine Control PID size, add explanation
54b9b5cb Revert "Poller: add 24 bit PID size support, fix routine control PID sizes"
a9fb6f77 Utils: fix int_to_hex for unsigned char
7ce60604 Scripting API: add OvmsVehicle.ObdRequest()
a4008e07 Utils: add int_to_hex string conversion
caf65c23 Poller: add 24 bit PID size support, fix routine control PID sizes
6e99b1d2 NL: update charge port for gen and wait states
25c5cb57 Commands: add echo & sleep commands (script utilities)
49adb6ab MicroRL: allow quoting for up to 10 command arguments
b1fe7cce VWeUp: add web dashboard configuration
e19cce60 WebUI dashboard: add digital displays for voltage, SOC, consumption & power
56670c79 serverV2: remove exporting from utils
e05d5b88 serverV2: include all v.g metrics and reorder
67425acf MCP2515: Change 1Mbps params to cnf1=0x00; cnf2=0xca; cnf3=0x81 (was cnf1=0x00; cnf2=0xd0; cnf3=0x82) to match Arduino MCP driver (https://github.com/coryjfowler/MCP_CAN_lib/commit/ece730cf697fef1cbe8a90111694868168d41000)
0aad1a9f CAN logger: CanSwitch dont log transmit events
11ad7562 Vehicle/Poller: add VW specific OBD/UDS request types 0x18 & 0x32
99c5c478 Vehicle/Poller: fix VW TP response pending processing
99ebd0f3 CAN logger: CanSwitch formatter (as used in Tesla Roadster VMS)
934076e1 VWeUp/OBD: add txid & rxid to unhandled poll response log
72683f3f Vehicle/Poller: add support for VW TP 2.0 (see vehicle.h comment)
a908613f serverV2: add v.g metrics
54f00d7a NL: use charge pilot stale to set charge door closed
4a7e4f96 Adjusted granny charge profile
c01779a0 NL: add V2X web config for minSOC and minRange
0557d33e NL: alpha V2X implementation
b0f2bb87 NL: add V2X capability
c1b81c35 Docs/Server HTTP API: add vehicle connect & disconnect calls,   add message times/ages and cabin temperature response fields
2e547d54 VWeUp/OBD: delay charge start reference to collect SOC corrections
d7705149 Updated Charge Limit notify messages
c4a7f4ee NL: code tidy up
b2afab5e NL: remove acvoltagemultiplier references
38f9210e NL: add interrupt status
8faf7d41 NL: fix NaN on voltage loss
acaaa58f NL: correct units
929a5511 NL: refactor 0x390 messages
f0c3fbf7 NL: improved new metric naming
6c277089 NL: add extra xnl metrics, update charge port status
60e63d5b VWeUp/OBD: add chargecap log test/debug configs
11981be4 VWeUp/OBD: fix ECU info electronics IDs, add immobilizer unit IDs
f34d0480 VW e-Up/OBD: add MFD range estimation as SOH source, add config option for SOH source
d3675519 VWeUp/OBD: fix charge done detection
6c1fb709 Make variant B also go to sleep 50s after 12V battery < 12.9V
2cf21e76 MG:Battery config - Range display in miles
accae394 Updated code in calcMinutesRemaining
ea047f16 vehicle_mgev_b.cpp: - check if GWM is already unlocked first before authentication - only authenticate with GWM since DRL command will start BCM authentication by itself if it detects that BCM is not authenticated
61f2182c - Make shell command drlauth become drl and make original drl become drln. - Make both drl/drln commands available to both variants - Setup m_bcm_auth in variant B - Set ms_v_env_awake and ms_v_env_ctrl_login to false when GWM is Unknown
bea3673e index.rst - Added more notes to shell commands
3d8d4804 Fixed sections syntax for index.rst
b04dba74 Modified index.rst
0f41b593 Corrected index.rst
6965145a - Moved to 2 car variants architecture where features are as follows: A: ✔ Zombie mode | ❌ GWM authentication | ❌ Poll BCM B: ❌ Zombie mode | ✔ GWM authentication | ✔ Poll BCM To current knowledge, MG ZS EVs from the UK and Netherlands are variant A and MG ZS EVs from Thailand are variant B. For cars from other countries, should decide on variant by seeing if they experience Zombie mode. If they do, should use variant A, if not, even though GWM is unlocked and doesn't require GWM authentication, should use variant B to avoid Zombie mode side effects and get richer metrics with BCM PIDs. For example Australian cars don't have Zombie mode and don't require GWM authentication. In this case, should use variant B.
957443f9 Battery config - Range displays in Miles
58196d45 Poller: support multi frame requests
4e7f9980 canlog: Fix tcpserver startup when wifi is down
2fddf688 canlog: Fix canlog handling of mongoose rx data with more than one message per packet
b2fb2c16 Use MAP_CAN_SPEED() to get accurately return gvret 33.333 and 83.333 speeds canformat_gvret_binary::PopulateBusList12() and canformat_gvret_binary::PopulateBusList3() were just multiplying bus->m_speed by 1000; the MAP_CAN_SPEED() understands CAN_SPEED_33KBPS and CAN_SPEED_83KBPS
e88988e5 Increased maximum charge time to 2 days
7e8e39c8 Poller: support CAN extended frame mode (29 bit identifiers)
3b244e30 Modified SOC & Range Limit reached notification code
93613a2b dbc: Support BA_DEF_ and BA_DEF_DEF_ sections
25610fa7 canlog: Increase outbound buffer size to avoid packet loss
6e366a47 Added changes to changes.txt
6fed302f Trip log: add hint for vehicles lacking v.p.trip support
517ee933 Zoe/Kangoo: update changes.txt
b929854d ZOE: add Kangoo support to Renault Zoe vehicles module
bc81f93c RE PID scanner: fix payload window for 8 bit PIDs
97a5ab17 Flags cleanup: Add usage strings and detect/report invalid flags
1529a3c8 GVRET improvements to improve SavvyCAN compatibility
4a5dba8e Add debugging information for GVRET binary protocol commands
7faa6efc Fixed incorrect title on Battery Config Page
ae1b3ed9 Re-working of CAN LOG framework to work off connections, and support control commands.
a21e8895 reformat energy and coloumb factors for vw e-UP
076e2220 Added Battery config page to set charge_limit_soc and range
2c866fac update energy and coloumb factors
d0a92467 Added charge time remaining for range
000a445c Initialised  ms_v_charge_limit_soc to 80%
19c53d74 Clarify Remote Climate Control and Gen 1 LEAF
9d160878 Added comments to changes.txt
c05cff60 Added code to calculate charge time remaining
33bfce44 Docs: add Jaguar Ipace to README
9a0a547b Build: include Jaguar Ipace
f64435fc VWeUp: fix init sequence for T26+OBD
ae6aeb16 First v0.0.1 for the Jaguar IPace vehicle
34707384 Tidy up
91351e8a Maxus polling update and cell metrics added
6ef0b0de add med3_pids.h
97a7a24e Revert metric list "verbose" change to be submitted seperately
2ec81923 SmartED: add charge power and efficiency
3dc3061f Display CCS charging in App
2ee6e576 Readme: add pull request handling recommendation